Dinamap Pro 100V2 Especificaciones descargar pdf (Pagina 61)

Using the Menu System

operating mode returns to the default setting of Manual. The

default setting of Manual can be overridden to return to the

previous user-selected setting (Auto or Manual) by selecting

Set BP under the Service menu. To cancel an Auto BP

determination, select the START/STOP key. To cancel an

Auto BP mode, select the Manual button in the Set BP (UK:

BP Mode) menu.

Manual

Selection of this option starts a Manual BP determination.

After power-off, the operating mode returns to the default

setting of Manual. The default setting of Manual can be

overridden to return to the previous user-selected setting

(Auto or Manual) by selecting Set BP under the Service menu.

Tgt Pressure

Selection of this option allows the user to set the BP target

inflation pressure. The initial target pressure can be set

between 100 and 250 mmHg in 5 mmHg increments. The

factory default is 150 mmHg for adults and 110 for neonates.

(This is indicated by “AUTO” at the end of adjustable range.)

When using a neonate blood pressure cuff, if the target

pressure is set to greater than 140 mmHg under the Set BP

or Clinical menu, the Monitor automatically defaults to a

target pressure of 110 mmHg. If the target pressure is set

between 100 and 140 mmHg, then that setting is the target

pressure that will be used. When the target pressure is

changed, the next determination will use the new target

inflation value if no systolic is available. Initial target pressure

is restored to the factory default setting after power-off. The

target pressure can be adjusted permanently in the Clinician

menu of the Service mode (refer to “Press” in the “Using the

Menu System” section).

Stat

Selection of this option allows the user to start Stat

determinations. When Stat is selected, blood pressure is

determined as many times as possible in 5 minutes.

Note: Alarm limits are disabled while in Stat mode.

Main

Selection of this button returns the user to the Main menu.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 107 108

Sin comentarios

Dinamap Pro 100V2 Especificaciones Pagina 61